Every material is chosen according to its function, outdoor exposure and the overall project design.
STAINLESS STEEL / EXTERIOR
Stainless steel
Corrosion resistance and easy maintenance for suitable applications.
STEEL / STRUCTURE
Steel
Structural strength and versatility for bespoke components.
GALV / PROTECTION
Galvanized steel
Zinc-protected steel for selected applications.
MAGNELIS / COATING
Magnelis
Metallic protective coating with corrosion resistance.
THERMAL / FIRE
Heat-resistant steels
Application-specific solutions for high-temperature zones.
SINTERED / SURFACE
Porcelain surfaces
Worktops and cladding selected for use, exposure and design.
02 / RAL · TEXTURES
Finishes
Two-coat electrostatic powder coating
We apply a powder coating system by electrostatic spraying in two stages: a first coat of anti-corrosion primer and a second finishing coat in different colours and textures.
Each coat undergoes oven polymerisation, producing a uniform, high-adhesion coating with excellent resistance to corrosion, wear and environmental conditions.
*The actual colour may differ from the digital image due to ambient lighting conditions and factors arising from the colour application process.
03 / DETAILS
Hardware & mechanisms
Quality also lies in what you barely notice: hinges, drawers, seals and closures engineered for outdoor use.
01
Hinges & drawers
02
Door seals
03
Magnetic catches
04
Wind-resistant closures
04 / SURFACES
Worktops & cladding
We work with Neolith and Dekton ranges to create premium sintered-stone worktops. Final specifications are verified for each application.
NeolithDEKTON
ENGINEERING / FINISHES / DURABILITY
Every component is chosen for its purpose
In an outdoor kitchen, materials are about more than appearance. Sun, moisture, weather, heat and frequency of use influence structures, cladding and mechanisms. We therefore study the right combination for each project, creating a coherent result from the cabinet interior to the worktop.
01
Metals and structural protection
We use stainless steel, steel, galvanized steel and Magnelis-coated solutions according to the purpose of each component. No single metal suits every area: geometry, proximity to heat, exposure and maintenance all matter. For some structural parts, protective coatings are an essential part of the construction, alongside metal thickness and section.
02
Outdoor surfaces and finishes
A coating is more than a colour. We consider preparation, protective systems, matte or textured finishes and intended use. RAL references can help link the kitchen to doors, paving and façades. Final samples should be viewed in the actual light: an outdoor finish can look different on a shaded terrace and in full sun.
03
Hardware, seals and catches
Hinges, drawer runners, magnets and closing systems deserve the same care as visible surfaces. We consider quality mechanisms, including Blum hardware where appropriate, alongside seals that can help reduce the ingress of dust and water. In windy locations, retainers or catches may help keep doors in position. No closure replaces correct installation and maintenance.
04
Porcelain worktops and heat areas
Sintered and porcelain surfaces such as Neolith and Dekton provide many design options. Thickness, edges, joints and support must be defined for the composition. Near a barbecue or oven, heat-resistant materials or thermal separation may be needed. The equipment manufacturer’s instructions determine safety clearances and affect the worktop details.
They are different materials and protective systems with different uses. We select each solution according to the part, exposure, contact with moisture or heat and desired finish.
Is Magnelis the same as stainless steel?
No. Magnelis is a protective metallic coating used on steel in specific applications. It is not the same material as stainless steel.
How do doors behave in windy areas?
We assess seals, hinges, magnets and catches based on door size and location, aiming to improve everyday use and reduce accidental opening where feasible.
Do you work with Neolith and Dekton?
We can integrate worktops and cladding from these ranges according to design and availability. Support, thickness, machining and compatibility with cooking equipment are considered.
STAINLESS STEEL / EXTERIOR
STEEL / STRUCTURE
GALV / PROTECTION
MAGNELIS / COATING
THERMAL / FIRE
SINTERED / SURFACE
